Axil Swing Motor
The Axil is an Irreversible electromechanical actuator for gates with leaves up to 2.8 m in length
- 230v or 24v motors
- Digital controller
- 240 code receiver card
- 2 no. transmitters
- Send/receive photocell
AXIL SWING GATES
- Frame completely made of aluminium
- Release compartment with key housing
- All the models in the Axil range are fitted with opening mechanical limit stop
- Practical wiring compartment
- Internal start capacitor
- Versions with encoder for accurate and safe operation
- Version with electrical limit switch in opening
- 24V version for intensive use
A popular choice when it comes to gate automation, the Axil range of motors are fitted with opening mechanical limit stops and an internal start capacitor. They feature practical wiring compartments as well as a release compartment with key housing to enable access to the setup. These motors feature an aluminium frame to ensure the vital components are protected from the elements, and protected from bumps that occur in the usage of the motor. There is also a 24v version to ensure it performs under intense and regular usage.
To view accessories please click the link gate & barrier accessories
Axil - Swing Gates Features Units 22J001 22J002 22J003 22J005 Maximum leaf length m 2.8 2.8 2.8 2.8 Maximum leaf weight Kg 300 300 300 300 Power supply V/Hz 230-50 230-50 230-50 24Vdc Idling current A 0.8 0.8 0.8 1.0 Full load current A 1.1 1.1 1.1 6.5 Maximum power W 230 230 230 - Maximum travel mm 350 350 350 350 Operating speed m/s 0,016 0,016 0,016 - Opening time 0÷ 90° s 20 20 20 20 Maximum thrust N 1700 1700 1700 1700 Working temperature °C -30 ÷ +55 -30 ÷ +55 -30 ÷ +55 -30 ÷ +55 Protection degree IP 44 44 44 44 Duty cycle % 35 35 35 60 Weight Kg 7.5 7.5 7.5 7.5
What is the Fire Rating for an Ellard Roller shutter?
It is the roller shutter that is fire rated rather than the Ellard motor. Therefore you would have to refer back to whom you bought the roller shutter from
What industrial door motors do you sell?
Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.
Do your traffic barriers have obstacle detection?
Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.
What are the benefits of direct drive motors?
Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.
Why should I use a fire motor as part of my fire safety plan?
Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.
Can I link specific access controls to my gate automation system?
Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.
Can I add extra features to my sectional door drives?
Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.
What are the main applications for high speed motors?
High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function
What size strips do you supply your sliding door gear track?
Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.
Which motors are most commonly used for shutters and garage doors?
Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.