Bingo Swing Gate Motor
The Bingo swing gate motor is an irreversible electromechanical actuator for gates with leaves up to 5m in length
- 230v or 24v motors
- Digital controller
- 240 code receiver card
- 2 no. transmitters
- Send/receive photocell
Bingo Swing Gate Motor
- All the models are fitted with both opening and closing mechanical limit stop: side stops are no longer required on the gate
- Internal start capacitor
- 24V version for intensive use
- 400 version for leaves up to 2.5 m
- 500 version for leaves up to 3 m
The Bingo range of gate automation products a fitted with opening and closing mechanical limit stop meaning side stops are no longer required on the gate. They have die-cast aluminium frames for protection and a practical plug in connector for electrical connections. The separately mounted motor reducer unit controls the vibrations so you will barely notice it running. Bingo motors have an internal start capacitor as well as a 24v version for heavy usage.
Unsure about any of the Ellard Gate Automation range?
We regularly run a gate automation training course from our premises based in Manchester. Course content covers the following:
- Gate overview: Basic identification of gate types, automation systems, components and common brands.
- Gate safety overview: Brief overview of legislation – requirements when commissioning new or existing automation systems and safety system devices.
- RAMS – Risk assessments and method statements relating to gate installation, new and existing.
- Practical fault finding and diagnosis: Familiarisation and safe use of electrical test equipment, requirements of electrical testing and practical training. Fault finding different gate systems, diagnosis and rectification.
- Practical gate safety: Risk assess different gate systems, carrying out and/or recommending safety upgrades. Force testing, recording results and certification.
To book this training, please contact the Sales & Marketing team 0161 947 2733
Bingo - Swing Gates Features 22B001 22B007 22B006 22B011 Maximum leaf length 3.5 5 3.5 5 Maximum leaf weight 400 500 350 400 Power supply 230 - 50 230 - 50 24Vdc 24Vdc Idling current 2 2 1.8 1.8 Full load current 3.2 3.2 5 5 Maximum power 480 480 120 120 Maximum travel 370 490 370 490 Operating speed 0.017 0.017 0.010 - 0.018 0.010 - 0.018 Opening time 0÷ 90° 18 24 18 24 Maximum thrust 1800 1800 1800 1800 Working temperature -30 ÷ +60 -30 ÷ +60 -30 ÷ +60 -30 ÷ +60 Protection degree 34 34 34 34 Duty cycle 30 30 80 80 Weight 11 12 11 12
What industrial door motors do you sell?
Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.
Do your traffic barriers have obstacle detection?
Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.
What are the benefits of direct drive motors?
Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.
Why should I use a fire motor as part of my fire safety plan?
Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.
Can I link specific access controls to my gate automation system?
Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.
Can I add extra features to my sectional door drives?
Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.
What are the main applications for high speed motors?
High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function
What size strips do you supply your sliding door gear track?
Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.
Which motors are most commonly used for shutters and garage doors?
Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.