Our Product Range Consists of:
Flange Motors Automatic Sliding Doors High Speed Motors Fire Door Motors Sectional Door Motors Direct Drive Motors Auto Swing Door Tube Motors Barrel Assembly Sliding Door Gear Traffic Barrier - Niuba Swing Gate Motors Sliding Gate Motors Residential Garage Door Motors Safety Equipment Intercom Systems/Access Controls Gate Automation Training Courses
Ellard > Products > Swing Gate Motors > Calypso Swing Motor

Calypso Swing Motor

The Calypso is an Irreversible electromechanical actuator for gates with leaves up to 3m in length


  • 230v or 24v motors
  • Digital controller
  • 240 code receiver card
  • 2 no. transmitters
  • send/receive photocell
  • Description

    Calypso Swing Gate Motor:

    • Single version for both right and left leaves
    • Practical release system
    • 24V version for intensive use
    • 400 version for leaves up to 2.5 m
    • 500 version for leaves up to 3 m

    Calypso swing gate motors are built to last with a die-cast aluminium frame and strong stainless steel shaft. The practical release system allows for easy operation and there is a single version for both the right and left leaves. The rear bracket allows for easier installation in all kinds of premises and the power cable is protected for maximum safety. This gate automation swing motors also have a 24v version for heavy or frequent usage. Take a look at our Calypso gate automation guide for more information.

    To view accessories please click the link gate & barrier accessories

  • Technical Specification

    Calypso Specification

    Calypso - Swing Gates        
    Features 22G001 22G003 22G014 22G015
    Maximum leaf length 2,5 3 2.5 3
    maximum leaf weight 400 500 300 400
    Power supply 230 - 50 230 - 50 24Vdc 24Vdc
    Idling current 0.8 0.8 0.5 0.5
    Full load current 1.2 1.2 6 6
    Maximum power 250 250 100 100
    Maximum travel 400 500 400 500
    Operating speed 0.016 0.016 0.015 0.015
    Opening time 0÷ 90° 22 25 22 27
    Maximum thrust 2900 2900 1500 1500
    Working temperature -30 ÷ +50 -30 ÷ +50 -30 ÷ +50 -30 ÷ +50
    Protection degree 44 44 44 44
    Duty cycle 30 30 90 90
    Weight 6.5 6.8 6.3 6.6
  • Reviews

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    We take your privacy seriously and will never share your information with third parties. Our communication with you will be managed in accordance with our Privacy Policy.

  • FAQs

    • What industrial door motors do you sell?

      Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.

    • Do your traffic barriers have obstacle detection?

      Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.

    • What are the benefits of direct drive motors?

      Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.

    • Why should I use a fire motor as part of my fire safety plan?

      Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.

    • Can I link specific access controls to my gate automation system?

      Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.

    • Can I add extra features to my sectional door drives?

      Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.

    • What are the main applications for high speed motors?

      High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function

    • What size strips do you supply your sliding door gear track?

      Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.

    • Which motors are most commonly used for shutters and garage doors?

      Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.

  • Downloads