Ellard News

Our Product Range Consists of:
Flange & Foot Mount Motors Automatic Swing & Sliding Doors High Speed Motors Fire Door Motors Sectional Door Motors Direct Drive Motors Tube Motors Powered Blinds and Awnings Barrel Assembly Sliding Door Gear Safety Equipment Intercom Systems/Access Controls Gate & Barrier Automation Training Courses Garage Door Operators

City 1 Evo i

City 1 Evo i

City 1 Evo i 

City 1 Evo i

Digital Control Unit for Swing Gates 12G048

Technical Specification 

Power supply:
230 – 50 (V/Hz

Maximum motor load:
2 x 700 (W)

Maximum load on 24 Vac accessories:
10 (W)

Working temperature:
-20 ÷ +60 (°C)

400 x 300 x 165 (mm)

4000 (g)

Protection degree: 
55 (IP)

  • Programming achieved using 3 program buttons and display
  • 230V power supply for 2 single-phase motors equipped with ENCODER
  • Plug-in adaptor for modular radio receiver MR2
  • Start, pedestrian start and stop controls from transmitter
  • Safety device test before any opening
  • 230V flashing light output (use flashing lights with intermittence)
  • Self-learning operating time function
  • Obstacle detection function
  • Operational cycle counter, with programmable maintenance reminders
  • Leaf slow-down function in limit switch area to prevent noisy closures and rebounds
  • Slow start function during opening (programmable time)
  • Monitoring of input status using the display
  • ADI 2.0 connector for the advanced management of the ADI devices
  • USB connector to connect the control unit to a PC and manage through software the programming of the unit, the firmware updates and the operation diagnostics
  • Connector for the LOW ENERGY module that allows saving electrical energy: when the gate is standing the LOW ENERGY module deactivates the display, the photocells and all the devices power supplied by a terminal box


For further information please call Ellard today on 0161 945 4561