City 2 Control Panel for Gates
City 2 Control Panel for Gates
Key features of the City 2 control panel
- Programmable using the on board display and 3 programming buttons
- Comprehensive safety device inputs including two 8.2K resistive or mechanical edges
- Emergency battery pack input
- Optional encoder and limit management
- Low voltage output for warning light or 24V flashing light
- Compatible with the Eco-logic solar panel system
- Plug in adaptor (MR2) for fixed rolling transmitters (up to 1008 codes)
- Start, pedestrian start and stop controls from the transmitter
- Auxiliary channel management from transmitter
- Safety device test before any opening
- Amperometric sensor obstacle detection function with programmable threshold
- Operational cycle counter, with programmable maintenance reminders
- Leaf slow-down function in limit switch area to prevent noisy closures and rebounds
Remember: The V2 AppTool is the go to app for technicians and installers , available Android and iOS, all you need is the BT-01 Bluetooth Module.
Use to set all parameters of the control unit, load default data, read current configuration or load a previously saved one.
City 2 Control Panel Specification
City 2 Control Panel Features CITY2+ CITY2+L CITY2+BC Power supply 230V / 50Hz 230V / 50Hz 24Vdc Max total load 250W 200W 250W Max load for each motor 150W 100W 150W Duty cycle 40% 40% 40% Max accessories load 24Vdc 7W 7W 7W Potection fuse 2,5A 2,5A _ Weight 3000g 1000g 1000g Dimensions 295 x 230 x 100 mm 295 x 230 x 100 mm 295 x 230 x 100 mm Working temperature -20 ÷ +60°C -20 ÷ +60°C -20 ÷ +60°C Protection IP55 IP55 IP55
What industrial door motors do you sell?
Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.
Do your traffic barriers have obstacle detection?
Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.
What are the benefits of direct drive motors?
Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.
Why should I use a fire motor as part of my fire safety plan?
Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.
Can I link specific access controls to my gate automation system?
Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.
Can I add extra features to my sectional door drives?
Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.
What are the main applications for high speed motors?
High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function
What size strips do you supply your sliding door gear track?
Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.
Which motors are most commonly used for shutters and garage doors?
Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.