Ellard News

Our Product Range Consists of:
Flange Motors Automatic Sliding Doors High Speed Motors Fire Door Motors Sectional Door Motors Direct Drive Motors Auto Swing Door Tube Motors Barrel Assembly Sliding Door Gear Traffic Barrier - Niuba Swing Gate Motors Sliding Gate Motors Residential Garage Door Motors Safety Equipment Intercom Systems/Access Controls Gate Automation Training Courses

Control Gate Automation with Ease

Control Gate Automation

Control gate automation with ease, control units can be configured via smartphones and tablets with the V2 AppTool.  Available for Android and iOS, only the BT-01 Bluetooth module is required.

Allowing for all parameters to be set on the control unit, loading default data, read the current configuration or load a previously saved one.

The V2 AppTool will allow the installer to register events, quickly updates firmware and position the previously saved configurations.

Functionality and performance of control units can be further amplified thanks to the various optional modules, such as Lux2+, Syncro module and Wes-adi.

V2 APP TOOLV2 App Tool Bluetooth module

 

Control gate automation with ease

City1-evo PLUS

  • Programming achieved using 3 program buttons and display
  • 230V power supply for 2 single-phase motors equipped with ENCODER
  • Plug-in adaptor for modular radio receiver MR2
  • Start, pedestrian start and stop controls from transmitter
  • Safety device test before any opening
  • 230V flashing light output (use flashing lights with intermittence)
  • Self-learning operating time function
  • Obstacle detection function
  • Operational cycle counter, with programmable maintenance reminders
  • Leaf slow-down function in limit switch area to prevent noisy closures and rebounds
  • Slow start function during opening (programmable time)
  • Monitoring of input status using the display
  • ADI 2.0 connector for the advanced management of the ADI devices
  • USB connector to connect the control unit to a PC and manage through software the programming of the unit, the firmware updates and the operation diagnostics
  • Connector for the LOW ENERGY module that allows saving electrical energy: when the gate is standing the LOW ENERGY module deactivates the display, the photocells and all the devices power supplied by a terminal box

city2+ PLUS

  • Programming achieved using 3 program buttons and display
  • Plug-in adaptor for modular radio receiver MR2
  • Start, pedestrian start and stop controls from transmitter
  • Auxiliary channel management from transmitter
  • Emergency pack battery input
  • Encoder input
  • Low voltage output for warning light or 24V flashing light
  • Safety device test before any opening
  • Amperometric sensor obstacle detection function with programmable threshold
  • Operational cycle counter, with programmable maintenance reminders
  • Leaf slow-down function in limit switch area to prevent noisy closures and rebounds
  • Monitoring of input status using the display
  • Energy Saving function to minimise consumption in standby mode
  • Also available as CITY2+BC version configured to work with the ECO-LOGIC system (this version has no transformer or power supply card)

FEATURED IN THIS POST

PROUD TO BE PART OF: