Our Product Range Consists of:
Flange Motors Automatic Sliding Doors High Speed Motors Fire Door Motors Sectional Door Motors Direct Drive Motors Auto Swing Door Tube Motors Barrel Assembly Sliding Door Gear Traffic Barrier - Niuba Swing Gate Motors Sliding Gate Motors Residential Garage Door Motors Safety Equipment Intercom Systems/Access Controls Gate Automation Training Courses

Easy Fit

Ellard supply the Easy Fit, a replacement for the Fitter’s Mate.

  • Description

    Features of the Ellard Easy Fit

    The Easy Fit is a simple control panel designed specifically for tube motors up to 230Nm and has a maximum output of 750W at 3.2A.

    Designed to work in both an Impulse Up/ Deadman Down or Deadman Up/ Deadman Down setting, depending on customer preference. This is achieved through the use of DIP switches.

    Ability to reverse the direction of the motor without rewiring the unit, by use of a DIP switch.

    There are Up/Stop/Down controls in the form of built on membrane buttons on the front of the panels.

    Also features a safety brake input.

    Remote handsets are sold separately, a maximum of 30 handsets can be used with the Easy Fit panel.

    When used with remotes, the Easy Fit can be used with either a single remote operating a single shutter, or by the flick of a DIP switch use one remote to control up to 4 different units.

    For more information , or to place an order, please contact one of our sales engineers.

  • Technical Specification

    Easy Fit Specification

    Power Supply 85-230 VAC 50Hz
    Max Motor Load 750 W  
    IP Rating IP56  
    Dimensions 150(i)*100(w)*40(h)  
    Protection Fuse F10A  
    Control by Membrane buttons, or External connection  
    Complies to EN standards EN300220-1, EN301489-1, EN62479, EN60950-1  
  • Reviews

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    We take your privacy seriously and will never share your information with third parties. Our communication with you will be managed in accordance with our Privacy Policy.

  • FAQs

    • What is the Fire Rating for an Ellard Roller shutter?

      It is the roller shutter that is fire rated rather than the Ellard motor. Therefore you would have to refer back to whom you bought the roller shutter from

    • What industrial door motors do you sell?

      Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.

    • Do your traffic barriers have obstacle detection?

      Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.

    • What are the benefits of direct drive motors?

      Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.

    • Why should I use a fire motor as part of my fire safety plan?

      Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.

    • Can I link specific access controls to my gate automation system?

      Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.

    • Can I add extra features to my sectional door drives?

      Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.

    • What are the main applications for high speed motors?

      High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function

    • What size strips do you supply your sliding door gear track?

      Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.

    • Which motors are most commonly used for shutters and garage doors?

      Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.

  • Downloads