Digital Control Panel Range
Industrial door controller for use on both Three phase and Single phase, compliant with the ‘New Machinery Directive’
The Ellard Action Control Panel – The next generation of low cost digital Door Controllers is here
ELLARD ACTION – BASIC DIGITAL CONTROLS
- Available in either single phase 230v or Three phase 415v versions (Mains supply +/-10%)
- IP55 rated
- Dimensions 310 x 210 x 125
- Weight 2.5kg
- Operating environment temp -20°C to + 50°C
- Maximum motor power 2.2kW
- For use with Mechanical and Electronic Limits (Nice and Kostal Encoders)
- Dip Switch Configuration
- Automatic recognition of attached safety devices (Photocell, Safety Edge)
- Accepts Optical or 8k2 resistive safety edge
- Photocell connection
- 230v Brake Output Connection
- Auxiliary 24v dc supply (100mA Max)
- Facility for External Push Button connection
- Additional Stop circuits
- Membrane buttons on lid for local operation
- Adjustable Auto Close Delay Timer (max 250 secs)
- On Board Status and fault LED diagnostics
To place an order or for further information contact one of our helpful sales engineers
ELLARD ACTION - BASIC DIGITAL CONTROLS MODEL NDCC2000 / NDCC2100 / NDCC2200 TYPE Control unit for single-phase or three phase motors with nice mechanical or electronic limit switches POWER SUPPLY Three-phase 3 - 400V AC / 3 - 230V AC (+10% -10%) 50/60Hz MOTOR MAX POWER 2.2KW POWER IN STANDBY <5W FUSE ON POWER BOARD F1: 500mA Type F; F2, F3, F4: 6 3A Type T OUTPUT1 WITH (NDA040) Voltage free contact (relay), programmable with overview OUTPUT2 WITH (NDA040) Voltage free contact (relay), programmable with overview SERVICES OUTPUT 24 V DC (max 100 mA) between input 1 (com) terminal and gnd (-) STOP 8K2/0SE terminal STOP SAFETY EDGE' INPUT For contacts that are nomally closed, normally open or of the 8.2k Ω constant resistance type or the OSE optical type; in auto recognition (a variation from the memorised ststus causes a "STOP" command) (OPEN) INPUT For normally Open (NO) contacts (CLOSE)INPUT For normally Open (NO) contacts ING1 (phlto) INPUT For normally Closed (NC) contacts, programmable with Oview RADIO CONNECTOR SM connector for SMXI, SMXIS, OXI or OXIT recievers RADIO AERIAL OUTPUT 52 ohm for RG58 or simular cables (maximum 10 m) PROGRAMME FUNCTIONS Functions programmable via the Oview programming and contol unit AUTO-RECOGNITION FUNCTIONS Auto-recognition of the "STOP" type of device (OSE or 8.2k Ω resistance) OPERATING TEMPRETURE -20°C - + 50°C PROTECTION CLASS IP55 DIMENSIONS 310 x 210 x 125mm WEIGHT 2.5Kg
What is the Fire Rating for an Ellard Roller shutter?
It is the roller shutter that is fire rated rather than the Ellard motor. Therefore you would have to refer back to whom you bought the roller shutter from
What industrial door motors do you sell?
Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.
Do your traffic barriers have obstacle detection?
Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.
What are the benefits of direct drive motors?
Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.
Why should I use a fire motor as part of my fire safety plan?
Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.
Can I link specific access controls to my gate automation system?
Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.
Can I add extra features to my sectional door drives?
Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.
What are the main applications for high speed motors?
High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function
What size strips do you supply your sliding door gear track?
Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.
Which motors are most commonly used for shutters and garage doors?
Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.