OUR PRODUCTS

Our Product Range Consists of:
Flange Motors Automatic Sliding Doors High Speed Motors Fire Door Motors Sectional Door Motors Direct Drive Motors Auto Swing Door Tube Motors Barrel Assembly Sliding Door Gear Traffic Barrier - Niuba Swing Gate Motors Sliding Gate Motors Residential Garage Door Motors Safety Equipment Intercom Systems/Access Controls Gate Automation Training Courses
Ellard > Products > Industrial Motor Accessories > Fire Door Control Panel FDCP

Fire Door Control Panel FDCP

The Ellard Fire Door Control Panel provides a comprehensive control for industrial fire resisting roller shutters

  • Description

    The Ellard Fire Door Control Panel gives advance warning in the event of a fire before closing the shutter or curtain, protecting both personnel and property from the effects of smoke and fire.

    This fully featured controller and set up functions with comprehensive closing options, including Solenoid drop, Power closing and 2 stage closing.

    Optional Repeater Panel available, which includes an additional sounder and high intensity LED illumination.

    Can be fully interfaced with Building Management Systems

     

    • Large audio-visual warning ‘FIRE SHUTTER CLOSING’
    • Can be mounted for top or bottom cable entry
    • High intensity long life LED illumination
    • Internal sounder 120db
    • Easy read display (LCD) for easy program set up
    • Intelligent dial for easy program set up
    • Demo mode – for easy on site training
    • 2X off 1.2Ah rechargeable batteries to maintain fire signal activation and to operate a brake release device in the event of mains power failure
    • Fuse protected 24VDC auxiliary supply
    • Round top cable glands for secure cable entry -(8 off)
    • Selectable fire signal types – N/O | N/C
    • Selectable fire signal type – 2-30VDC
    • Low voltage external push button control
    • Programmable relays
    • Automatic reset
    • Fire alarm test option
    • Automatic reset and opening once the fire signal is removed
    • Panic button option for emergency escape
    • Double knock for zones 1 & 2
    • Factory default reset option (in program mode)
    • Matching repeater panel with high intensity long life LED illumination and 102dB sounder
    • Manual/automatic opening after 1st stage closing
    • 8k2 monitored circuit for ancillary devices (smoke detectors etc)
    • Comprehensive fault diagnoses with visual messages
    • Photocell & fire alarm input circuits continually tested in non fire alarm mode each hour and after every normal door operation
    • Battery level check and voltage level displayed on LCD
    • Fuse protection for Aux supply, mains supply and output relays
    • Auto reset on fire signal removal
    • Auto opening after 1st stage of 2nd stage opening
    • Fully CE compliant

     

     

  • Technical Specification

    FCP Specification

    Fire Door Control Panel  
    Power Supply 24v d.c.
    Working Temp 20 to +70°C
    Dimensions (mm) 236 (w) x 286 (h) x 108 (h)
    Weight (Kg) 3
  • Reviews

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Security Code
    captcha
    Enter Code

  • FAQs

    • What industrial door motors do you sell?

      Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, foot mount, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.

    • Do your traffic barriers have obstacle detection?

      Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.

    • What are the benefits of direct drive motors?

      Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.

    • Why should I use a fire motor as part of my fire safety plan?

      Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.

    • Can I link specific access controls to my gate automation system?

      Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.

    • Can I add extra features to my sectional door drives?

      Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.

    • What are the main applications for high speed motors?

      High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function

    • What size strips do you supply your sliding door gear track?

      Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.

    • Which motors are most commonly used for shutters and garage doors?

      Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power.

    • Why should I use a fire motor as part of my fire safety plan?

      Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.

  • Downloads

You may also like

PROUD TO BE PART OF: