Flange Mounted Motors
Flange Mounted Motor Range
All motors are tested and certified here at Ellard prior to dispatch
Available in phase, 400v or 1 phase, 230v
Perfect for high use applications such as car parks, offices and residential premises.
The Ellard Range of Flange Mounted Motors has the following features:
- Available from 70Nm to 300Nm
- Low level or high level override mechanisms
- With or without brake
- Fully pre-wired with 7 metre push button cable length and 8 metre haul chain as standard
- Supplied as Impulse Up, Deadman Down operation as standard
- Easily upgraded to accept all types of safety features or include remote control by simply connecting the Ellard Mini Standard Controller
Accessories for Ellard’s Flange Motor Range
- Comprehensive range of cost effective safety brakes all TUV approved to latest European standards
- Plug in connector lead between motor and safety brake which enable easy interlock connection
- Wide range of drive gear sets in either 1″ , 3/4″, 5/8″ or 1/2″ pitch (platewheel, sprocket, drive chain and connecting links)
100% Rated Flange Mount Motors complete with Digital limits
- FT160 CB GB 3ph 30mm shaft 160Nm
- FT300 CB GB 3ph 35mm shaft 300Nm
- WT395 CB GB 1ph 30mm shaft 95Nm
- Perfect for high intensity applications, such as car park shutters and busy warehouse premises.
All Ellard Flange Mounted Motors are pre-wired with a Mini Basic controller with the option to upgrade to the Mini Standard controller.
To find out which Flange Motor is the right one for your use, please contact one of our sales engineers.
Flange Motor Range
Flange Motor Range 3 PHASE Model Manual Override Mechanism Volts Output Torque Output Speed Duty Cycle Rated Current Protection Integral Brake Shaft Diameter F100 C GB High Level 400v/3Ph/50Hz 100Nm 28 rpm 60% 1.4amps IP44 No 1" F100 C BGB High Level 400v/3Ph/50Hz 100Nm 28 rpm 60% 1.4amps IP44 Yes 1" F100 BKE Low Level 400v/3Ph/50Hz 100Nm 28 rpm 60% 1.4amps IP44 Yes 1" F160 C BGB High Level 400v/3Ph/50Hz 160Nm 28 rpm 60% 2.6amps IP44 Yes 30mm F160 C BKE Low Level 400v/3Ph/50Hz 160Nm 28 rpm 60% 2.6amps IP44 Yes 30mm FT160 CB GB 100% High Level 400v/3Ph/50Hz 160Nm 24 rpm 100% 2.8amps IP44 Yes 30mm FT300 C BGB 100% High Level 400v/3Ph/50Hz 300Nm 24 rpm 100% 3.5amps IP44 Yes 35mm SINGLE PHASE WT395 C BGB 100% High Level 230v/1Ph/50Hz 95Nm 24 rpm 100% 5.6 amps IP44 Yes 30mm W370 CGB High Level 230v/1Ph/50Hz 70Nm 28 rpm 25% 4.5 amps IP44 No 1" W370 CKE Low Level 230v/1Ph/50Hz 70Nm 28 rpm 25% 4.5 amps IP44 No 1"
What industrial door motors do you sell?
Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.
Do your traffic barriers have obstacle detection?
Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.
What are the benefits of direct drive motors?
Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.
Why should I use a fire motor as part of my fire safety plan?
Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.
Can I link specific access controls to my gate automation system?
Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.
Can I add extra features to my sectional door drives?
Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.
What are the main applications for high speed motors?
High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function
What size strips do you supply your sliding door gear track?
Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.
Which motors are most commonly used for shutters and garage doors?
Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.