OUR PRODUCTS

Our Product Range Consists of:
Flange Motors Automatic Sliding Doors High Speed Motors Fire Door Motors Sectional Door Motors Direct Drive Motors Auto Swing Door Tube Motors Barrel Assembly Sliding Door Gear Traffic Barrier - Niuba Swing Gate Motors Sliding Gate Motors Residential Garage Door Motors Safety Equipment Intercom Systems/Access Controls Gate Automation Training Courses
Ellard > Products > Sliding Gate Motors > Hyperfor Sliding Gate Motor

Hyperfor Sliding Gate Motor

The Hyperfor is an irreversible electromechanical rack actuator motor reducer for gates up to 4000kg

  • Description

    • Built-in digital control unit
    • Galvanized painted sheet steel cabinet
    • Intensive operation even with large gates
    • Obstacle detection
    • Self-learning of opening and closing times
    • Synchronized operation of two motors using the SYNCRO module
    • Possibility to adjust the gearmotor torque
    • Industrial electromechanical limit switch and M6 pinion
    • We can offer a 3ph version or 1ph version with inverter
    • Programmable acceleration and deceleration (230V version with inverter)

    The Hyperfor sliding gate motor is a true powerhouse handling up to 4000kg with ease. Intensive operation is handled even with large gates and there is the possibility to adjust the gearmotor torque. It also boasts obstacle detection, built-in digital control unit and industrial electromechanical limit switch plus M6 pinion. The SYNCRO module allows the synchronised operation of two motors and self learning opening times. The 230v version has a three-phase motor with inverter and programmable acceleration and deceleration.

  • Technical Specification

    Hyperfor Specification

    Hyperfor    
    Description 230 three-phase with inverter (gates up to 4000kg) 400V three-phase (gates up to 4000kg)
    Model HYERFOR 4000-1 HYPERFOR 4000
    CODE 23F003 23F004
    Gate maximum weight (kg) 4000 4000
    Power supply (V/Hz) 230 / 50 400 / 50
    Maximum power (W) 1100 1100
    Full load current @230Vac (A) 5 2
    Gate speed (m/s) 0.016 ÷ 0.32 0.16
    Maximum thrust (N) 4800 4800
    Duty cycle (%) 50 50
    Pinion M6-Z15 M6-Z15
    Working temperature -20 ÷ +55 -20 ÷ +55
    Motor weight 35 35
    Protection degree 55 55
    Maximum load on 24vac accessories (W) 10 10
  • Reviews

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Security Code
    captcha
    Enter Code

  • FAQs

    • What industrial door motors do you sell?

      Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, foot mount, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.

    • Do your traffic barriers have obstacle detection?

      Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.

    • What are the benefits of direct drive motors?

      Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.

    • Why should I use a fire motor as part of my fire safety plan?

      Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.

    • Can I link specific access controls to my gate automation system?

      Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.

    • Can I add extra features to my sectional door drives?

      Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.

    • What are the main applications for high speed motors?

      High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function

    • What size strips do you supply your sliding door gear track?

      Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.

    • Which motors are most commonly used for shutters and garage doors?

      Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power.

    • Why should I use a fire motor as part of my fire safety plan?

      Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.

  • Downloads

PROUD TO BE PART OF: