Niuba Barrier Kit
Rapid opening automatic raise arm barrier for both residential and multiple use installations up to 6m width. The Niuba barrier kit allows for accurate and safe operation and can be made more economical using the Eco-Logic solar power system. Additionally, synchronised operation of two barriers can be achieved using the SYNCRO module. Each kit includes a balance spring and kit for boom installation. A number of accessories can also be purchased.
- 230/24v barrier
- Integral digital controller
- Oval boom and rubber kit
- Foundation/anchor plate
- Balancing spring
- Fixed end support post
Niuba Barrier Kit
- Allows for practical access to the control unit and installation of Sensiva photocells
- Accurate and safe operation with encoder
- Obstacle detection
- Self-learning of opening and closing times
- Synchronised operation of two barriers using the SYNCRO module
- Balance spring and kit for installing the boom included
- Anodized aluminium boom (accessory)
- Programmable acceleration and deceleration (24V versions)
- Operation in case of absence of power using the B-PACK backup battery (24V versions)
- Operation with solar power using the ECO-LOGIC system (24V versions)
- Automatic learning of end-stop positions of the barrier in opening and closing.
- Emergency lock release
- Input for mechanical safety edges
- Programming of the control unit achieved using 3 buttons and display
- Control unit allows for operational cycle counter, with programmable maintenance reminders.
- Input of photocells allows for self test functionality
Take a look here at the control units we supply for our gate and barrier automation.
There are many uses for the Niuba barrier kit from car parks, airports, apartment blocks and offices, anywhere environment with a high volume of vehicular traffic that needs to be controlled.
Ellard are also manufacturers and suppliers of fire shutter operators, direct drive operators, sectional door operators, sliding door gear, mechanical extras, remote controls, tube motors and starters.
Niuba Kit Specification
Niuba Kit Model NIUBA4-24V NIUBA6-24V NIUBA4-230V NIUBA4-230V Code 36A022 36A023 36A024 36A025 Power Supply 230 - 50 230 - 50 230 - 50 230 - 50 Motor Power Supply 24 24 230 - 50 230 - 50 Motor Maximum Power 240 300 300 350 Opening Time 3 ÷ 4 5 ÷ 6 6 8 Working Tempreture -20 ÷ +55 -20 ÷ +55 -20 ÷ +55 -20 ÷ +55 Duty Cycle 80 - (200) 80 - (150) 30 - (90) 30 - (90) Protection IP44 IP44 IP44 IP44 Motor Weight 44Kg 52Kg 44Kg 52Kg
What industrial door motors do you sell?
Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.
Do your traffic barriers have obstacle detection?
Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.
What are the benefits of direct drive motors?
Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.
Why should I use a fire motor as part of my fire safety plan?
Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.
Can I link specific access controls to my gate automation system?
Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.
Can I add extra features to my sectional door drives?
Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.
What are the main applications for high speed motors?
High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function
What size strips do you supply your sliding door gear track?
Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.
Which motors are most commonly used for shutters and garage doors?
Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.