We offer a complete range of safety brakes to suit all requirements
The Ellard safety brake range is suitable for all uses
Features of the RSB Safety Brake range
- All brakes have been fully TUV certified (certificates are available upon request)
- RSB Safety brakes act as a bearing under normal conditions
- Corrosion protected design
- Maintenance free and resistant to wear
- Fully Compliant with legislation
- All brakes can be interlocked with the motor control panel
Safety Brake Information
RSBG – 18mm Bore available to suit the following barrels:
- 57mm octagonal
- 67mm octagonal
- 85mm deprat
RSB0A – 16.mm – 25mm Bore available to suit the following barrels:
- 57mm octagonal
- 67mm octagonal
- 85mm deprat
RSB 1/2 – 30mm Bore available to suit the following barrels:
RSB2/3 – 40mm Bore available to suit the following barrels:
For more information, or to order one of our safety brakes, contact one of our Sales Engineers
Model Bore Size Stock Code Locking Speed Typical Catch Weight RSB - G 18mm (square) 16101 22 RPM 206kg on a 76mm Barrel RSB0 - A 16.8mm 16099 22 RPM 218kg on a 102mm Barrel RSB 1/2 30mm 16096 22 RPM 425kg on a 127mm Barrel RSB 2/3 40mm 16084 22 RPM 490kg on a 139mm Barrel RSB4 40mm 16092 12 RPM 823kg on a 193mm Barrel TA4 50mm 16089 18 RPM 925kg on a 193mm Barrel TA5 65mm 16076 12 RPM 1160kg on a 267mm Barrel TA6 80mm 16077 10 RPM 1700Kg on a 355mm Barrel
What is the Fire Rating for an Ellard Roller shutter?
It is the roller shutter that is fire rated rather than the Ellard motor. Therefore you would have to refer back to whom you bought the roller shutter from
What industrial door motors do you sell?
Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.
Do your traffic barriers have obstacle detection?
Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.
What are the benefits of direct drive motors?
Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.
Why should I use a fire motor as part of my fire safety plan?
Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.
Can I link specific access controls to my gate automation system?
Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.
Can I add extra features to my sectional door drives?
Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.
What are the main applications for high speed motors?
High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function
What size strips do you supply your sliding door gear track?
Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.
Which motors are most commonly used for shutters and garage doors?
Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.