Starters and Controllers
The Mini Basic and Mini Standard controllers are changing, more information to be released shortly….
Ellard’s extensive range of Starters and Controllers includes the industry standard Mini Standard Controls and Mini Basic Controls, alongside other panels.
Ellard provide a wide range of Starters and Controllers, for whatever you need them for.
Fire Control Panels
Dalmatic Control Panels
Ellard are the exclusive UK distributor for the Dalmatic range of control panels, including the Mini Basic, Mini Standard, and V7E. More information can be found here.
Easy Top Starters and Controllers
Ellard also provide the Easy Top range of Starters and Controllers, which work in conjunction with our Phox range of transmitters. They are available with upgrades such as a courtesy light and bluetooth interface
Easy Fit Starter
Developed as a replacement to the popular Fitter’s Mate, the Easy Fit combines ease of use and installation, with a small, stylish unit and optional upgrade to use remote controls.
DPro Control Panel
For use on Ellard’s HDFl high speed motors. The Dpro control panel has a mains supply single phase 230V AC. All panels have an emergency stop button on the front and with a seven segment display mounted on the front of the panel, programming and fault finding is made simple.
Easy Top - Easy LUX - Easy 4G Specification
Technical Specification 230V models 120V models Power Supply 230V/50Hz 120V/60Hz Max Motor Load 1100W 600W Max Accessories Load 30 VDC 3W 3W Working Temperature -20 ÷ +60 °C -20 ÷ +60 °C Protection Fuse F1=5A Delayed F1=5A Delayed Dimensions 170 x 185 x 70 mm 170 x 185 x 70 mm Weight 800g 800kg Protection IP55 IP55 Easy LUX Power Supply 230V/50Hz Max Motor Load 1100W Max Accessories Load 30 Vdc 3W Working Temperature -20 ÷ +60 °C Protection fuse F1=5A Delayed Dimensions 170 x 185 x 70 mm Weight 800g Protection IP55 Easy 4G Power Supply 230V/50Hz Max Motor Load 1100W Max Accessories Load 30 Vdc 3W Working Temperature -20 ÷ +60 °C Protection fuse F1=5A Delayed Dimensions 170 x 185 x 70 mm Weight 800g Protection IP55 Light Built in Light
What is the Fire Rating for an Ellard Roller shutter?
It is the roller shutter that is fire rated rather than the Ellard motor. Therefore you would have to refer back to whom you bought the roller shutter from
What industrial door motors do you sell?
Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.
Do your traffic barriers have obstacle detection?
Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.
What are the benefits of direct drive motors?
Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.
Why should I use a fire motor as part of my fire safety plan?
Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.
Can I link specific access controls to my gate automation system?
Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.
Can I add extra features to my sectional door drives?
Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.
What are the main applications for high speed motors?
High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function
What size strips do you supply your sliding door gear track?
Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.
Which motors are most commonly used for shutters and garage doors?
Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.