Zariss Swing Motor
The Zariss is an Irreversible electromechanical pivoting arm for gates with leaves up to 2.2m in length
- 230v or 24v motor
- Onboard digital controller
- 240 code receiver card
- 2 no. transmitters
- Send/receive photocell
ZARISS SWING GATES
- Easy installation on pillars of medium / big dimensions
- Strong articulated anti-shearing arm in pressure die-cast aluminium
- Obstacle detection
- Programmable acceleration and deceleration
- Self-learning of opening and closing times
- Operation in case of absence of power using the B-PACK backup battery
- Operation with solar power using the ECO-LOGIC system
One of the most technologically advanced of all gate automation products, Zariss swing motors feature a built in digital control unit for maximum control. The motor has automatic obstacle detection and has programmable acceleration and deceleration. Additionally, it can be solar powered to save on energy or batteries but also has a back up release system should there be an absence of power. Zariss swing motors will automatically learn opening and closing times while it has a strong articulated anti-shearing arm in pressure die-cast aluminium. The motor is also easy to install on pillars of medium/big dimensions, take a look at our Zariss gate automation guide for more information. It is fully compatible with the latest generation of ADI units to allow you to use remotes controls, and safety is a top priority with inputs for photocells and safety edges.
To view accessories please click the link gate & barrier accessories
Zariss Swing Gates Features 22E005 22E006 22E007 Maximum leaf length 2.2 2.2 2.2 Maximum leaf weight 250 250 250 Power supply 230 - 50 230 - 50 24Vdc Full load current - 0.4 3.5 Maximum power (2 motors) 180 - - Speed 1.1 ÷ 1.65 1.1 ÷ 1.65 1,1 ÷ 1,65 Torque 180 180 180 Working temperature -20 ÷ +55 -20 ÷ +55 -20 ÷ +55 Protection degree 44 44 44 Duty cycle 80 80 80 Weight 18 10 8 Maximum load on 24 vac accessories 7 7 7
What is the Fire Rating for an Ellard Roller shutter?
It is the roller shutter that is fire rated rather than the Ellard motor. Therefore you would have to refer back to whom you bought the roller shutter from
What industrial door motors do you sell?
Here at Ellard ltd we specialise in supplying industrial door motors and supply a comprehensive range of motor types and models. This includes, direct drive, flange, sectional, garage door and tubular motors. Our selection is vast, so for a comprehensive list of our products and specifications you can visit our dedicated pages or get in touch with our expert team.
Do your traffic barriers have obstacle detection?
Yes, our Nubia traffic barrier has built in intelligent controllers which offer obstacle detection and built in lights to make them easy to see in the dark or in bad weather.
What are the benefits of direct drive motors?
Direct drive motors remove the need to use an elaborate system of cogs. This means that the full power of the motor goes straight into the pulling mechanism, making it an extremely efficient motor. Without the extra mechanisms, it also has a very low sound output comparatively to other methods.
Why should I use a fire motor as part of my fire safety plan?
Fire motors are often connected to your fire detection system and activate if fire is detected on your premises. They quickly and efficiently close helping to contain the fire and keep your employees/customers safe from the dangerous area. Government legislation requires that all fire doors must have an automatic function and all Ellard fire motors comply with the latest rules and regulations. All motors can be set to a Smoke Curtain mode, and our new Fire Door Control Panel has a panic circuit function to guarantee a means of escape.This allows you to re-open the shutter 3/4 then immediately re-close when fire alarm is still active.
Can I link specific access controls to my gate automation system?
Yes, our gate automation systems can be linked to keypads, switches, intercom systems and key switches, dependant on your specifications or security requirements. Take a look at the range of controls and accessories available for gate automation.
Can I add extra features to my sectional door drives?
Yes, we ensure that your sectional doors have easy wiring to add safety and access accessories.
What are the main applications for high speed motors?
High speed motors are used for a wide range of purposes and can increase the efficiency of companies when time is of importance. Beverage, food, car and chemical factories often use high speed motors both to increase productivity and provide a security barrier. They can also be interlocked to create a airlock function
What size strips do you supply your sliding door gear track?
Our track sections are cold rolled and in standard lengths of 2,000, 2,500 and 3,000mm and can be used for both side or top fixing. If you would like to learn more about our sliding door gear then please get in touch with our team.
Which motors are most commonly used for shutters and garage doors?
Tubular motors are the most common place motor for roller garage doors and shutters. They provide a durable, fast and quiet solution for both light and heavy applications. Tubular motors can be plugged into the mains through our easy fit panel to give you low voltage at the key switch or are backed up with battery power. Additionally, we provide garage door automation for sectional and balanced doors.