DIGITAL DIRECT DRIVE
MDF60
The MDF/MWF motors are equipped with digital limits, built-in anti-drop device and low-level haul chain. With a sleek and compact design, the MDF/MWF motors are an optimal solution for roller shutter installations. 24rpm options available.
-
MDF60 - 1000Nm (55mm hollow bore, 3 phase)
-
MDF60 HD - 1400Nm (55mm hollow bore, 3 phase)
-
MDF60 HD - 1000Nm 24rpm (55mm hollow bore, 3 phase)
-
MDF60 HD - 1000Nm 24rpm used with CS320 FU Inverter (55mm hollow bore, 3 phase)
-
TÜV-tested safety gear with integrated damping
-
Safety gear operates independently of position and speed and is also both maintenance-free and wear-free
-
Rolled worm shaft – high-quality materials in the gearbox, very good self-locking values
-
MDF drives are equipped with a thermocouple in the motor winding; this prevents overloading due to overheating
-
Various emergency controls available – reliable operation in the event of a power failure
-
Accurate electronic limit switch setting
-
20 cycles per hour
-
All cable connections between the MDF gear motor and the control unit are pluggable
-
Operation with frequency inverter possible
-
Temperature range from −20 °C to +60 °C
-
IP54
-
Higher duty cycle available (HD Version)
KIT COMPONENTS
600mm Keyed Shaft
55mm CODE: 16118
600mm Plain Shaft
55mm CODE: 16119
Mounting Foot Plate
CODE: 02112
Flange Bearing
55mm CODE: 15019
Mounting Foot Gusset CODE: 58004
Return Plate
550x550/55mm CODE: 02118
650x650/55mm CODE: 02120