DIGITAL DIRECT DRIVE
MDF/MWF05
The MDF/MWF motors are equipped with digital limits, built-in anti-drop device and low-level haul chain. With a sleek and compact design, the MDF/MWF motors are an optimal solution for roller shutter installations. 24rpm options available.
-
MDF05 - 140Nm (30mm hollow bore, 3 phase)
-
MDF05 - 140Nm 24rpm (30mm hollow bore, 3 phase)
-
MDF05 - 140Nm 24rpm used with CS320 FU Inverter (30mm hollow bore, 1 phase)
-
MWF05 - 140Nm (30mm hollow bore, 1 phase)
-
TÜV-tested safety gear with integrated damping
-
Safety gear operates independently of position and speed and is also both maintenance-free and wear-free
-
Rolled worm shaft – high-quality materials in the gearbox, very good self-locking values
-
MDF drives are equipped with a thermocouple in the motor winding; this prevents overloading due to overheating
-
Various emergency controls available – reliable operation in the event of a power failure
-
Accurate electronic limit switch setting
-
20 cycles per hour
-
All cable connections between the MDF gear motor and the control unit are pluggable
-
Operation with frequency converter possible
-
Temperature range from −20 °C to +60 °C
-
IP54
-
Higher duty cycle available (HD version)
KIT COMPONENTS
500mm Keyed Shaft
30mm CODE: 16107
500mm Plain Shaft
30mm CODE: 02022
Mounting Foot Plate
CODE: 02111
450x450/30mm Return
Plate CODE: 02114
Flange Bearing 30mm CODE: 03088