top of page
JM 150 1PH
FIRE DOOR MOTOR
Approx lifting weight, 150 kg at a speed of 6.2 rpm.
The Ellard JM Fire Motor is built with rapid set limit switches and incorporates a low-level override system with a controlled descent. Each JM motor has a built-in PCB controller and a low-level open/stop/close push button. Open, close and two safety limits as standard.
JM150 - A single-phase operator capable of lifting doors up to 4m in height and 150 kg in weight. Available with a variety of sprockets.
MOTOR VARIENT CODES
03209: JM150 Right Hand 11 Tooth 3/8” Sprocket
03210: JM150 Left Hand 11 Tooth 3/8” Sprocket
03211: JM150 Right Hand 11 Tooth 1/2” Sprocket
03212: JM150 Left Hand 11 Tooth 1/2” Sprocket
DOWNLOADS
BRACKET PACK 6 FOR JM 150 - 03274
1 X Back Plate
Fixing studs for JM 150, c/w drive boss 61T 3/8" pitch plate wheel, 3/8" chain, link and break device.
1 X Shaft
30mm width shaft, 200mm length.
94mm Disc Set
2 x plain discs and 1 x drive disc.
106 mm Disc Set
2 x plain discs and 1 x drive disc.
Flange Bearing
1 x 30mm Flange Bearing.
bottom of page